Description
The Darkglass Alpha Omega Dual Distortion Bass Pedal is in New condition and made by Darkglass , it is a great Pedal Bass Distortion Dual Omega Alpha Darkglass Guitar Effect Pedal – The Darkglass Alpha Omega is a co-designed creation between Darkglass and the legendary composer producer and bassist; Jon Stockman. Differing greatly from other Darkglass preamp and overdrive units the Alpha Omega utilises OP-amps and features two unique distortion circuits. Alpha provides a punchy tight sound with a huge amount of definition. Omega on the otherhand is brutal and raw and packed with power. These can be selected or blended using the Mod control knob. With this inventive control alongside the Growl and Bite toggle switches and the high-quality three-band active EQ controls the Darkglass Alpha Omega is an insanely flexible unit. . Available from Guitar Pedals Amps & Stuff for only £ 329 – Features Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob allowing for fine control of the blend ratio. Level: Sets the volume of the overdriven signal. Drive: Sets the amount of saturation in the overdriven signal. Bite: Boosts High Mids (2.8kHz) for additional presence and definition. Growl: Shelving Bass Boost for a fatter tone and increased low end saturation. Mod: Selects or mixes between the two unique distortion circuits: Alpha is punchy tight with a lot of definition whereas Omega is simply brutal and raw. Bass: +-12dB at 80Hz Mid: +-12dB at 500Hz Treble: +-12dB at 5kHz Parallel Output: Hardwired copy of your input signal useful for getting a clean signal in recording and live situations. Direct Output: A balanced version of the 1/4″ output useful for running into PAs or studio mixing consoles. Dimensions: 10.7cm x 12 cm (4.21 x 4.72) WARNING The Darkglass Alpha Omega Dual Distortion Bass Pedal has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries. Unregulated power supplies and/or higher voltages may result in sub-optimal noise performance and even damage your unit voiding the warranty. The manufacturer claims that the above product fulfills the requirements as set by EN55013 EN55020 EN60555-2 EN60555-3 RoHS WEEE.
