Description
The Palmer WTPB40 Powerbar 8 Output Power Supply for Pedalbay 40 is in New condition and made by Palmer , it is a great 40 Pedalbay for Supply Power Output 8 Powerbar WTPB40 Palmer Guitar Effect Pedal – Save time space and frustration. The Palmer WTPB40 Powerbar gives you plenty of power (up to 2000mA) for your pedals through eight isolated centre-negative outputs. Two of these outputs can be switched between 9V 12V and 18V so you can even power the more exotic members of your collection with ease. Protection circuitry for each output keeps your signal and equipment safe at all times. The Powerbar has been designed for complete discreet integration into the Palmer Pedalbay 40. It simply replaces the first crossbar so you still have a full pedalboard to place your pedals on. The WTBP40 comes complete with DC cables hook-and-loop tape and nuts for installation. So you can install the power supply and power your pedals straight out of the box. . Available from Guitar Pedals Amps & Stuff for only £ 113.5 – In the box Palmer WTPB40 Powerbar 5 x DC Cable (straight to angled 16cm long) 9 x DC Cable (straight to angled 60cm long) Hook-and-Loop Tape M6 Nuts M8 Nuts Power Supply Features Can be completely and discreetly integrated into your Palmer Pedalbay 40 pedalboard (Pedalbay 40 available separately) Spacing-saving design can be mounted directly to the board by replacing the first crossbar Your pedals can still be attached to the top of the Powerbar ensuring that no board space is lost Equipped with eight centre-negative DC outputs two of which can be switched between 9V/12V/18V Capable of producing a total current of 2000mA (2A) for powering multiple pedals Integrated short circuit and overload protection for each output Isolated outputs ensure noise is kept to an absolute minimum Built-in LED power and function indicators Specifications Product Type: Pedalboard power supply Mains Connector: Plug-in power supply Input Voltage: 100-250V Outputs: 8 Output Connectors: 2.1mm x 5.5mm Polarity: Centre-negative (DC) Output Voltage: 9V 12V 18V Maximum Output Current: 2A Isolated Outputs: Yes Cord Length: 150+150cm Indicators: Fault Power Controls: Output voltage selector Dimensions: 450mm x 50mm x 24mm (W x D x H) Weight: 0.65kg Product Code: PWTPB40
