Description
The Radial Tonebone PZ-Pro 2-Channel Acoustic Preamp is in New condition and made by Radial , it is a great Preamp Acoustic 2-Channel PZ-Pro Tonebone Radial Guitar Effect Pedal – The ultimate toolkit for acoustic sound. Get flawless signal for your instruments with the Radial Tonebone PZ-Pro 2-Channel Acoustic Preamp. This is the most powerful acoustic preamplifier put into a pedal making it perfect for guitars to violins mandolins to cellos and anything in between. And with two channels on board you can switch and blend you instruments at the touch of a button. More of the sound you want. With less unwanted noise. The Tonebone PZ-Pro ensures optimal signal integrity with polarity reverse switches notch controls and powerful filters. That means clear sound for all your instruments. Dial your tone with an intuitive 3-band EQ. Whether you need to scoop out the bass or emphasise your mids the power is right there at your fingertips The new standard for plug and play. With the Tonebone PZ-Pro its easy to connect post and pre DI signals to your PA and monitors. Connect to your tuner via the dedicated buffered output for silent operation on stage. All this and more from a pedal thats small enough for any setup. . Available from Guitar Pedals Amps & Stuff for only £ 699 – Great tone without compromise The PZ-Pro is built for instrumentalists who demand the best sound possible. Whether you’re on stage or in the studio this all-in-one acoustic preamplifier gives you full tonal control for each channel. Switch between or blend two sources at the touch of a button. Your piezo equipped instruments are fully catered for with Boost functionality and feedback eliminating filter controls. Dial your tone with the semi-parametric EQ for each channel. Whatever you play the PZ-Pro is like mission control for your acoustic setup. Testing. 1 2… Plug in your microphone and get the best sound possible. The PZ-Pro allows any dynamic or condenser microphone to be used allowing you to blend your pickups signal for a more even natural sound. Add effects from your FX loop and tailor them to your performance with the dedicated wet/dry knob. Whether you need to boost turn on your effects or both everything is assignable to the fully adaptable footswitch. You’re ready for any eventuality. Features Perfect for multiple acoustic instruments with two channels on board Flawless sound from each channel thanks to instrument preamps with separate EQs Ideal for Piezo equipped instruments with input boosters available on both channels Easily assign FX loop with wet/dry control Silent instrument changeovers thanks to the dedicated mute switch Easily assign Boost FX Loop or both to your footswitch via the dedicated switch Assign FX loop to input A B or both with ease Blend your FX into your dry input sources via the sensitive rotary dial Instantly remove unwanted frequencies with the three-position switch variable control and high pass filter Dial your tone with the semi-parametric 3-band EQ Full control of your volume for each input channel Correct phase issues with 180-degree polarity reverse switches Instantly sum inputs A and B after their retrospective EQ sections Connect condenser microphones with ease thanks to 48V phantom power at mic input B Tune your instruments with ease thanks to the dedicated tuner buffered output Send wet and dry signals to your PA and monitors via the PRE EQ and POST EQ outputs Eliminate unwanted ground loop noise with the dedicated lift switches Prevent accidental power disconnection with the cable clamp Heavy duty steel chassis protects your pedal from knocks and drops Lightweight compact and built to fit into any pedalboard setup Specifications Power Supply: 15VDC power supply included Number of Channels: Two Construction: 14-gauge steel chassis Dimensions: 9.1” x 5.32” x 1.82” Please note: This is a new release. More information and technical specifications will be added as soon as they become available.
