Description
The Radial Tonebone PZ-Pre Acoustic Pre-Amp is in New condition and made by Radial , it is a great Pre-Amp Acoustic PZ-Pre Tonebone Radial Guitar Effect Pedal – . The Radial Tonebone PZ-Pre Acoustic Pre-Amp is the ultimate toolkit for acoustic sound. This is the most powerful acoustic preamplifier put into a pedal making it perfect for guitars to violins mandolins to cellos and anything in between. And with two channels on board you can switch and blend your instruments at the touch of a button More of the sound you want. And less unwanted noise. The Tonebone PZ-Pre ensures optimal signal integrity with phase alignment switch notch controls and ground lift. That means clear sound for all your instruments. Dial your tone with powerful EQ controls. Whether you need to scoop out the bass or emphasise your mids the power is right there at your fingertips The new standard for plug and play. With the Tonebone PZ-Pre its easy to connect post and pre DI signals to your PA and monitors. Connect to your tuner via the dedicated buffered output for silent operation on stage. All this and more from a pedal thats small enough for any setup. . Available from Guitar Pedals Amps & Stuff for only £ 429.13 – Need a boost? If your acoustic instruments are equipped with a piezo pickup then you probably do. Thankfully the PZ-Pre is here to help. This powerful preamp gets its superior audio from 100% discrete class-A PZB boosters. That means ultra-quiet signal that’s adaptable to any type of pickup system. Quickly assign different functions to your boost switch for maximum flexibility. The PZ-Pre connects directly to your effects loop giving you total control of your instrument’s sound. Whatever you need you’ll get flawless sound for up to two instrument channels. Effortlessly switch and blend on stage in seconds. Your acoustic tone just got a huge upgrade. Features Switch or blend instruments with two channels on board Quickly eliminate feedback with notch and resonance filters Perfect for PA and monitors with Pre and Post radial DI outputs Simple control on stage via power booster and mute functions Add gain for solos with the 8dB boost knob Dial your tone thanks to a semi parametric 3-band EQ Total control of input volume level on each channel Eliminate phase issues with the reverse switch Assign boost effects loop or both to your boost switch with the footswitch toggle Tame unruly low frequencies with the three-position lo-cut filter Perfect for piezo equipped instruments thanks to the PZB-2 class-A booster Insert effects into the signal path via loop/send return Remove hum and buzz caused by ground loops with the lift switch Plug directly into your tuner via the dedicated 1/4” buffered output Rugged construction for damage-free transportation Compact design can be included in almost any pedalboard setup Specifications Inputs: 1/4″ Phone unbalanced Input Impedance: Normal 6.8k Ohm Piezo 10Meg Ohm PZB Buffers: +10dB boost Low-Cut Filter: 75Hz / 220Hz Notch Filter Range: 56Hz – 330Hz Notch Q: -8dB / -15dB Low EQ: Shelving type +/-12dB (75Hz) High EQ: Shelving type +/-12dB (7.5kHz) Mid EQ: Semi-parametric +/-12dB (82Hz – 5.6kHz) Power Boost: Unity gain to +12dB max. Effects Loop: 1/4″ Phone unbalanced Send 1k Ohm / Return 15k Ohm Switching: FET Switching Output (instrument): 1/4″ Phone unbalanced 1k Ohm output impedance Tuner Output: 1/4″ Phone unbalanced 6.8k Ohm output impedance Pre-EQ Output: XLR balanced 600 Ohm mic-level Post-EQ Output: XLR balanced 600 Ohm mic-level XLR Pin-Out: pin 1 ground pin 2 hot (+) pin 3 cold (-) Power Supply: 15VDC 400mA (included) center pin positive Dimensions: 203mm (W) x 108mm (D) x 35mm (H) Weight: 1.2kg
