Guitars Pedals Amps & Stuff

Ampeg Venture V3 300w Bass Head - Image 1
Ampeg Venture V3 300w Bass Head - Image 2
Ampeg Venture V3 300w Bass Head - Image 3
Ampeg Venture V3 300w Bass Head - Image 4
Ampeg Venture V3 300w Bass Head - Image 5
Ampeg Venture V3 300w Bass Head - Image 6
  • Ampeg Venture V3 300w Bass Head
  • Ampeg Venture V3 300w Bass Head
  • Ampeg Venture V3 300w Bass Head
  • Ampeg Venture V3 300w Bass Head
  • Ampeg Venture V3 300w Bass Head
  • Ampeg Venture V3 300w Bass Head
Ampeg Venture V3 300w Bass Head - Image 1Ampeg Venture V3 300w Bass Head - Image 2Ampeg Venture V3 300w Bass Head - Image 3Ampeg Venture V3 300w Bass Head - Image 4Ampeg Venture V3 300w Bass Head - Image 5Ampeg Venture V3 300w Bass Head - Image 6


Ampeg Venture V3 300w Bass Head

View more in ,
Tags: , ,
View more by

As an affiliate partner, we may earn a small commission when you buy through our links — at no extra cost to you.

£449.00

This is the Ampeg Venture V3 300w Bass Head from Ampeg, listed in Amps on guitars pedals amps and stuff.. Read More below.

Description

Here’s what Ampeg say about the Ampeg Venture V3 300w Bass Head:

“The ultra-portable 300-watt Venture V3 is the smallest and lightest of the three heads in the Venture Series and easily fits into a gig bag, a laptop bag, or the optional Venture carrying bag, making it an excellent choice for the travelling bassist. Its Class D power section provides more than enough power to drive any of the Venture Series speaker cabs or practically any other cab bassists may encounter while touring.

  • 300 watts @ 4 ohms
  • Legacy Preamp with 3-band EQ
  • Sweepable mid frequencies
  • Ultra Hi/3-way Ultra Lo switches
  • Footswitchable SGT Overdrive circuit with SVT and B15 voicing switch
  • 3.97lb / 1.80kg

0 dB/-15 dB Switch

Use this switch to set the optimal input level. Typically, youll want to use the -15 dB setting with instruments that include high-output pickups or active electronics, or if you frequently see the Peak LED [13] light up.

Ultra Lo

This 3-way switch selects a -20dB cut at 40Hz (left) or a 2dB boost at 40Hz combined with a -10dB cut at 500Hz (right). The center position bypasses the Ultra Lo circuit.

Ultra Hi

This 2-way switch engages a 9dB boost at 8kHz.

Super Grit Technology (SGT) Section

Adds classic Ampeg overdrive.

  • On/Off: Enables or disables the SGT circuit. The SGT circuit may also be toggled on and off using an optional footswitch connected to the Switch jack on the rear panel. (Note that connecting a footswitch disables the front panel switch.)
  • SVT/B15: This switch toggles between two flavours of overdrive, based on the character of either the SVT or Portaflex B15 tube amplifiers.
  • Grit/Level: This dual-concentric knob adjusts the amount of grit (the inner control) and the overall output level of the circuit (the outer control).

Power/Mute Indicator

This LED bar lights up blue when the amplifier is powered on and red when the Mute switch [14] is engaged.

DI Bal. Out

This balanced XLR output may be used to route line-level audio to the input of an external mixer or recorder, or to an external power amplifier or powered loudspeaker. It is not affected by the Volume control.

  • Pre/Post: When set to Pre the DI signal bypasses the -15dB input pad, Compressor, tone controls, SGT circuit, and FX Loop. When set to Post it includes them.
  • -20dB: Reduces the DI output level by 20dB.
  • Lift/Gnd: Engages the ground lift to help eliminate hum if necessary.

Switch (TRS)

Connect a 1/4″ TRS dual footswitch to remotely toggle the SGT circuit (tip) and Mute (ring) on and off. Connecting a TS single footswitch will toggle the SGT circuit on and off.”

About the manufacturer

Ampeg

Ampeg is a legendary name in bass amplification, best known for its powerful low-end, warm tone, and unmistakable character. Closely associated with classic valve designs and iconic stacks, Ampeg gear has been a staple on stages and in studios for decades, particularly for rock, soul, funk, and punk bass sounds. From compact combo amps to full-scale touring rigs and cabinets, Ampeg products are built to deliver authority, clarity, and feel, making them a trusted choice for bass players who want a sound that anchors the music with confidence.

More info about this Product

Amp Cabinets

A speaker cabinet is responsible for turning your amplifier’s power into the sound you actually hear, and it plays a huge role in the overall feel and character of your tone. Different cabinet sizes, speaker types, and configurations can affect everything from low-end punch to clarity and projection. Cabinets can be open-back or closed-back, single or multi-speaker, each offering a distinct response and spread in a room. Whether paired with a powerful amp head or a compact setup, the right speaker cabinet helps define how your guitar sits in a mix and how it feels to play.

Amps

Guitar amps cover everything needed to amplify, shape, and project your guitar sound, from small practice setups to full stage and studio rigs. In this category you’ll find combo amps, separate amp heads and speaker cabinets, covering valve, solid-state, and hybrid designs, each offering a different feel and response. You’ll also see modelling and digital amps, built-in effects, footswitches, attenuation solutions, replacement speakers, valves, and essential accessories to keep an amp performing at its best. Whether you’re chasing pristine cleans, classic crunch, or modern high-gain tones, guitar amps and related gear are all about finding the right balance of power, tone, and control for the way you play.

More Gear like this

300W

Amp

An amp is an amplifier used to boost the signal from a guitar and shape its overall tone and volume. It plays a major role in how a guitar sounds, influencing everything from clean clarity to natural overdrive and distortion, and is a core part of any guitar setup for both practice and live performance.

amp head

Related gear