Description
Markbass will not fail to impress. The Markbass Little Mark Tube 800 Bass Head in Utility is New, in stock, and ready to ship with fast, reliable delivery across the UK, Ireland, and Europe. For more details within Utility, additional options, full specifications, demos, images, videos, and secure online ordering, read on below.
Here’s what Markbass says about the Little Mark Tube 800…
The Little Mark Tube solves the “tube or solid state” dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, “Will I have enough power?” The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp… or a mix of both!
Specifications
Inputs
- Input 1: impedance 500 Kohm, max. voltage 15 Vpp
- Input 2: (Balanced XLR/1/4″ combo)
- Balanced: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
- Effect Return: impedance 33 Kohm, max. voltage 10 Vpp
Controls
- Gain 1: -60 dB to +23 dB range
- Gain 2: -60 dB to +23 dB range
- Master Volume
- Line Out Level
- Ground Lift: switch on rear panel
- Pre/Post EQ: switch on rear panel
- Mute: push/pull on master knob
- Phantom Power: switch (on INPUT 2 / Balanced)
Equalization
- Low: centre frequency 40 Hz; level: ±16 dB
- Low Mid: centre frequency 360 Hz, level: ±16 dB
- High Mid: centre frequency 800 Hz, level: ±16 dB
- High: centre frequency 10 kHz, level: ±16 dB
- VPF (Variable Pre-shape Filter: centre frequency 380 Hz
- VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz
Outputs
- Line Out: balanced XLR, max. voltage 20 Vpp
- Line Out: unbalanced, max. voltage 20 Vpp (pre-EQ)
- Line Out: unbalanced, max. voltage 2 Vpp
- Line Out: speakon/1/4″ combo, 1/4″
Other
- Weight: 6.61 lbs / 3 Kg
- Width: 10.87 in. / 27.6 cm
- Depth: 9.84 in. / 25 cm
- Height: 3.27 in. / 8.3 cm
- Output Power: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms
- Power Requirement: 100/120V; 230V; 240V – 50/60Hz (Voltage is factory preset according to region of sale)
- Minimum ohm load for all Markbass heads is 4 ohms.
- Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
- Rack ears do not come included with this head.
