Description

The Guitar Amps department take a look at this New Amp, the Lab Gruppen FAD2402 2x 240W Commercial Amplifier by is New, it is in stock at a great price and delivered to all areas of the UK. Read More for more product information, images, latest prices and how to order.

Here’s what Lab Gruppen say about the Lab Gruppen FAD2402 2x 240W Commercial Amplifier:

2 x 240 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FAD2402 is easy to install and operate – even for non-technical personnel. Simply put, the FAD2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

Dante Audio Connectivity

Dante replaces point-to-point analog and digital connections with a standard IP network that delivers completely lossless audio, massive channel counts and near infinite signal routing flexibility, all while being incredibly easy to deploy and use.

Dante Domain Manager is network management software that enables user authentication, role-based security and audit capabilities for Dante networks, while allowing seamless expansion of Dante systems over any network infrastructure.

The FAD2402 is DDM ready.

Energy Star * Certified

Not only does FAD2402’s direct drive constant power technology provide superior audio performance and reliability, it also consumes less mains power than competing models, which has earned it Energy Star * certification.

This amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

Specifications

Maximum Output Power
4 or 8 Ω per channel
240 W

Number of Ouput Channels
Number
2

Minimun Load Impedance
4 Ω mode
4 Ω

8 Ω mode
8 Ω

70 V output mode
41 Ω

100 V output mode
82 Ω

Controls
Front
N/A

Rear
Gain control, load config (4 Ω / 8 Ω / 70 V / 100 V), high-pass filter switch, reset button)

Indicators
Front
Power
On (blue), standby (yellow)

Limit (red LED), per channel
-1.5 dBFS (digital)

Signal (green LED), per channel
> -63 dBFS (digital)

Fault (red LED)
Overheat, DC fault, over current etc

Rear
Dante
Indentify (yellow), clock sync (white)

System
Input transmission type
Dante, 2 channels Rx

Input connectivity
1 x RJ45 Ethernet connector, 1-port 100 Mbps to Dante interface

Input sensitivty
-2 dBFS (digital)

Maximum input level
0 dBFS (digital)

Outputs connectivity
1 x 4-pin 5.08 mm Euroblock connector

Output circuit type
Class D

Remote connector
2 x RJ45 Ethernet connector

Performance
Distortion,1/8 rated power
<0.1%

Frequency response
20 Hz to 20 kHz, +0/-1.5 dB

Crosstalk
>72 dB

Signal-to-noise
>101 dBA

High-pass filter
80 Hz HPF

Circuit Protection
Cooling
Convection-cooled, fanless

Amplifier protection
Thermal protection, over current protection, DC protection, high frequency protection

Load protection
Controlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage (Fuse)
Main voltage
100-240 V~, 50/60 Hz with active power factor correction

Power consumption 1/8th rated power @ 4 Ω
120 W

Mains connector
Standard IEC connector

Dimensions / Weight
Dimensions (H x W x D)
44 x 218 x 280 mm (1.7 x 8.6 x 11″)

Weight
2.6 kg (5.7 lbs)

Finish
Brushed black anodized aluminum chassis with black painted steel bottom

Approvals
CE, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0