Description

The Guitar Amps department take a look at this New Amp, the Lab Gruppen FA602 2 x 60W Commercial Amplifier by is New, it is in stock at a great price and delivered to all areas of the UK. Read More for more product information, images, latest prices and how to order.

Here’s what Lab Gruppen say about the Lab Gruppen FA602 2 x 60W Commercial Amplifier:

This 2 x 60 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FA602 is easy to install and operate – even for non-technical personnel. Simply put, the FA602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

Energy Star * Certified

Not only does FA602’s direct drive constant power technology provide superior audio performance and reliability, it also consumes less mains power than competing models, which has earned it Energy Star * certification.

This amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

Easy to Install

The FA602 comes equipped with rubber feet, enabling the amps to be placed on a desk, shelf or any clear surface without any additional installation requirements. However, optional rack mounting hardware is also supplied, allowing one or several models to be housed and protected inside an enclosure. This adds extensive flexibility as a single product can be housed in a half 19″ rack or full rack enclosure as well as a pair of amplifiers can easily be mounted side-by-side in a single rack space. With the included brackets the unit can also be mounted to a wall or under a table/shelf.

Specifications

Maximum Output Power
4 or 8 Ω per channel
60 W

Number of Ouput Channels
Number
2

Minimun Load Impedance
4 Ω mode
4 Ω

8 Ω mode
8 Ω

70 V output mode
82 Ω

100 V output mode
166 Ω

Controls
Front
N/A

Rear
Gain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter

Indicators
Power
On (blue), standby (yellow)

Limit (red LED), per channel
Input clip, output limit

Signal (green LED), per channel
>1.23 mV (-56 dBu)

Fault (red LED)
Overheat, DC fault, over current etc

System
Inputs
2 x 3-pin 5.08 mm Euroblock connector

Input impedance
Balanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV)

Maximum input level
9.75 V (+22 dBu)

Outputs
1 x 4-pin 5.08 mm Euroblock connector

Output circuit type
Class D

Remote connector
2 x RJ45 Ethernet connector

Performance
Distortion, 1/8 rated power
<0.5%

Frequency response
20 Hz to 20 kHz, +0.5 / -1 dB

Crosstalk
>65 dB

Signal-to-noise
>100 dBA

High-pass filter
80 Hz HPF

Circuit Protection
Cooling
Convection-cooled, fanless

Amplifier protection
Thermal protection, over current protection, DC protection, high frequency protection

Load protection
Controlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage
Main voltage
100-240 V~, 50/60 Hz with active power factor correction

Power consumption 1/8th rated power @ 4 Ω
50 W

Mains connector
Standard IEC connector

Dimensions / Weight
Dimensions (H x W x D)
44 x 218 x 280 mm (1.7 x 8.6 x 11.0″)

Weight
2.6 kg (5.7 lbs)

Finish
Brushed black anodized aluminum chassis with black painted steel bottom

Approvals
CE, WEEE, CCC, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0