Description
The Electronic Guitar Pedals always come out on top. This is New is in stock and ready to post out to you, with fast, reliable delivery straight to your door. For more New Guitar Pedals options, read on for full specifications, demos, and secure online ordering.
Founded in 2015 and hailing from Boston, Massachusetts, Electronic Audio Experiments are more than just a pedal manufacturer, they are "an exploration in sound and texture via electronics". The Electronic Audio Experiments Halberd is a transistor overdrive circuit designed to deliver the greatest possible dynamic range and clarity. Rich in harmonic content, this medium-gain pedal produces a thick, full sounding overdrive courtesy of a dozen transistors working in perfect harmony. Tonally, the Halberd sits somewhere between a blown-up tweed amp and an overloaded console for a sound that feels familiar but refreshingly unique too.
Controls
- Pre – This sets the overall signal gain. Lower settings impart light compression, then increasing amounts of clipping up to a fuzzy overdrive, depending on the Voice and Depth settings.
- Depth – This is an adjustable low frequency shelving filter at the input, and is very interactive with the setting of the Pre control. It can be thought of as a second gain control affecting low frequencies only.
- Tone – This is an adjustable high shelf cut at the output, helpful for taming harsher frequencies especially at high gain settings.
- Post – This sets the overall output level, and is buffered for full transparency at all signal levels.
- Voice – 3 position switch to set the overall drive character
- Clang (up) – Increases gain in the upper midrange, for an aggressive sound and a sharp attack
- Standard (middle) – Moderate gain with a gentle mid push; identical to Halberd V1
- Deep (down) – A full range gain boost with woolly saturation and a fuzzy note attack
Specifications
- Bypass switching: Silent electronic switching with a Class A JFET buffer
- Input impedance @ 1Khz: 1MΩ
- Output impedance @ 1Khz: <1KΩ
- Power: 9VDC, 2.1mm center negative barrel. The current draw is 50mA.
- We recommend a regulated, isolated power supply rated for 100 mA minimum. The DC input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries.






