Description
The Surfy Guitar Pedals always come out on top. This is New is in stock and ready to post out to you, with fast, reliable delivery straight to your door. For more New Guitar Pedals options, read on for full specifications, demos, and secure online ordering.
Here’s what Surfy Industries say:
The SurfyDrip is a remote reverb mixer controller and foot switch that works in conjunction with your SurfyBear Classic V3, SurfyBear Classic V2, SurfyBear Metal V2, Fender 6G15 and similar reverb units or any Fender style combo “-Reverb” amps. The switch works the same in both cases, but how you connect it depends on the application.
Surfybear Classic V2 and V3 / Surfybear Metal V2 / Similar Reverb Units
Connect a standard mono 1/4″ jack cable between the SurfyDrip and the footswitch jack input of the reverb unit. In the Fender 6G15 the footswitch jack is located at the back of the chassis, between the tubes.
Combo “Reverb” Amps
This connection style requires additional adapters (not included):
- RCA male to twin RCA female splitter
- 1/4″ jack female to RCA male adapter
Locate the send/return cables connecting the reverb pan to the amp. On most amps, these will be at the back or at the bottom of the chassis. Disconnect the Reverb Output (or Reverb Return) RCA jack on the amp and plug in here your RCA male to twin RCA female splitter. Connect the cable coming from the reverb pan to one end of the RCA splitter and the SurfyDrip to the other end, using eventually your RCA to 1/4″ jack adapter and a standard 1/4″ jack cable.
